Leave Your Message
Can One RCCB Handle DC Leakage on a Budget? Meet the EDF-100 B for Industry
Blog
News Categories
Featured News
  • whatsapp
  • Linkedin
  • Youtube
  • Facebook

Can One RCCB Handle DC Leakage on a Budget? Meet the EDF-100 B for Industry

2026-10-12

[Wenzhou], [2026/10/12] — Many plant managers ask the same question: if a panel runs variable-frequency drives, servo systems, EV chargers, or other power electronics, do we really need expensive Type B protection on every circuit?

The answer is not "buy the most expensive device everywhere," but "specify B-type only where DC leakage can appear, and standardize the model." That is exactly where the EDF-100 B Type RCCB fits industrial budgets.

Why AC- and A-type are not enough in factories

Standard residual current protection works well for pure AC leakage, and Type A adds pulsating DC. But industrial loads such as VFDs, rectifiers, UPS, charging points, and transformerless PV interfaces can produce smooth DC or mixed AC/DC residual currents. Conventional cores can become insensitive under DC bias, meaning the breaker may miss a fault or trip for the wrong reason. Type B devices detect AC, pulsating DC, and smooth DC residual currents, making them the practical choice for power-electronics-heavy panels.

EDF-100 B Type2.png

Where EDF-100 B saves money in industrial use

Instead of treating B-type as a premium add-on, the EDF-100 range is designed for cost-controlled rollouts:

  • One family for mixed panels — 4-pole for three-phase drives/feeders, keeping procurement and spares simple.
  • Right sensitivity per zone — 30 mA for personnel protection in accessible or wet areas, 100/300 mA for feeder and fire-risk circuits, avoiding over-specification.
  • Fewer nuisance trips — electromagnetic release with surge resistance reduces random shutdowns on VFD and servo circuits, cutting unplanned downtime.
  • Fast panel work — 35 mm DIN-rail mounting, color contact indicator (red closed/green open) and unified terminals speed up installation and maintenance.

Typical industrial scenarios

  • Motor control centers with VFDs, soft starters and conveyor drives.
  • Workshops and CNC lines where rectifiers and servo amplifiers generate composite leakage.
  • EV charging corners inside factories, logistics yards or staff parking, where AC distribution sits next to DC charging electronics.
  • Solar/UPS retrofits on existing LV panels, where transformerless inverters can introduce smooth DC components.

Compliance without overbuying

The EDF-100 B Type series meets EN IEC 62423 and IEC/EN 61008. Ratings cover 16–63 A, with 2-pole for 230/240 V and 4-pole for 400/415 V. Conditional short-circuit ratings reach 6 kA or 10 kA depending on version, and residual disconnect stays within the 0.1 s class at rated sensitivity. For most industrial feeders, this delivers shock protection, equipment protection, and code alignment without resorting to customized or smart-relay solutions unless monitoring is specifically required.

Budget tip for procurement teams

Map the panel load first. Assign Type B only to circuits with VFDs, chargers, PV, UPS, or rectifiers. Keep Type A/AC for purely conventional loads. Standardize EDF-100 2P/4P sensitivities across the site. This avoids both under-protection and wasteful blanket B-type specification. Volume sourcing, a fixed spare list and factory-direct quotes further reduce lifecycle costs compared to mixing multiple brands.

"Industrial safety should not mean buying the most expensive breaker on every pole," an ELECO product engineer said. "EDF-100 B gives DC leakage coverage where it matters and keeps the panel budget predictable."
See how EDF-100 B fits your next project
Request a quote or download the full datasheet at China EDF-100 Residual Current Circuit Breaker ( B Type ) Manufacturer, Factory | ELECO
Volume pricing and sample orders are available for panel builders and distributors.